High quality perforated wood panels, MDF and HDF panels.

MDF veneer and HDF - laminated from one and both sides - ex stock

Distributors / stockists wanted !

deutsche Version

versione Italiana

 
   wooden panels
   stock list
    perforations
    links
   contact to ADMAR
   terms / conditions

    rotec.info

   sheet metal
   perforated sheets
   hand railing
   grating
   security rusts
   bird protection
   security fences
   expanded metals
   profile edgings
   glass profiles
   woven wire mesh
   spiral staircases
   laser cutting
   wire mesh
   wheel chair ramps

Taubenabwehr

Taubenabweh-shop

ADMAR wooden panels

Die ADMAR high quality wooden panels are developed and produced at our manufacturing plant in Hungary.
The main applications are : cladding for walls and ceilings, doors, furnitures, interior design, architecture and acoustic elements.

1. Veneer MDF panels

Standard dimensions :
minimum size : 2070 x 1 250 mm
maximum size : 2800 x 1500 mm
thickness  3,5 -4,0 mm
with 0,5 - 0,7 mm thicknes of veneer

These panels are usable exclusively for interior applications.
Types: AA (both sides), AB (one side), veneered, not polished.

Perforated MDF panels are use for application where a natural wood finish is desirable.

In the standard, the panels are delivered with non coated surface. Be carefully by coating with waterbased mordants and varnishes - may be you carry out your own tests. Because of the perforated surface - you should also adjust the viscosity of the varnish.

Some operations of sanding - up to the microsection - then priming - sanding the primer - at last: top coating, according to the estimated strain.

2.  Nature MDF panels

Standard dimensions :
minimum size : 2070 x 1 250 mm
maximum size : 2800 x 1500 mm
thickness  3,5 -4,0 mm

Nature MDF panels find application where an untreated surface is necessary and can be coated afterwards.

3. One side laminated - HDF panels

Standard dimensions :
minimum size : 2070 x 1250 mm
maximum size : 2800 x 1500 mm
thickness  3 mm

Mainly used in the furniture industry. When sticking on to other decoration panels - fantastic colour combinations can be achieved. By cementing two panels with the same hole sample and surface, a both side laminatd panel of 6mm in thicknes can be resulted.

For further questions and more technical details please contact Mr. Martin Geiger.
Wholesalers and merchants welcome.

Tel. +49 6543 5024848    
or Fax +49 6543 502504

  rotec GmbH Berlin Langrehr & Co., Werner-Voss-Damm 58, D-12101 Berlin, Telefon +49 30 789039-0, Fax +49 03 789039-51
resonsible editor: Karl Marx
 

Please visit our webpages:
Süd Afrika http://www.admarmetal.com
Ungarn:  http://www.metmark.hu